Skip to main content
24/7 Local Heating & Cooling Service Dispatch across 50 States + DC
Speak With Dispatch: (855) 734-0279
HP
HVAC Dispatch ProCentral Furnace & AC Service
24/7 Cooling Service • 22,152 Zip Codes

AC Replacement Near You

High-efficiency central AC replacement and split-system installation.

When an older central air conditioner locks up a compressor, springs a major evaporator coil leak, or struggles to cool your home while driving summer electric bills through the roof, replacing the unit is often far more cost-effective than pouring another thousand dollars into old parts.

Our installation crews replace residential central split-system air conditioners and packaged cooling systems. Every AC replacement includes replacing both the outdoor condensing unit and the matched indoor evaporator coil, flushing or replacing the copper refrigerant line set, pulling a deep micron vacuum, and weighing in the exact factory refrigerant charge.

Immediate Local Dispatch

Book AC Replacement Now

Call with your 5-digit zip code. We verify local technician availability and provide an upfront written quote before work starts.

Call (855) 734-0279

We install ducted central split-system air conditioners and packaged cooling units. We do not install window AC units or ductless mini-split systems.

What AC Replacement Covers

AC replacement is the complete removal of your worn-out outdoor air conditioning condenser and indoor evaporator coil, followed by the installation and commissioning of a new, factory-matched SEER2 central cooling system.

Replacing only the outdoor condenser while leaving a 15-year-old indoor coil in place is one of the worst mistakes in HVAC: mismatched coils restrict refrigerant flow, kill efficiency, and void manufacturer warranties. We install properly matched outdoor condensers and indoor A-coils or N-coils so your new system delivers its full cooling capacity and humidity removal.

Symptoms & Problems This Solves

  • •Dead or grounded outdoor AC compressor on a system out of warranty
  • •Leaking indoor evaporator coil or obsolete R-22 Freon system that costs too much to recharge
  • •Central air conditioner is 12 to 20 years old and cannot keep the house below 78 degrees in summer
  • •High summer electric bills from an outdated 10 SEER or 12 SEER cooling unit
  • •Clammy, humid indoor air caused by an improperly sized or worn-out air conditioner
  • •Noisy, rusted outdoor condenser cabinet disturbing your patio or neighbors

Key Homeowner Benefits

  • ✓Up to 30% to 40% reduction in summer cooling electricity use when upgrading from an older 10-12 SEER unit to a modern SEER2 system
  • ✓Matched indoor evaporator coil and outdoor condenser backed by a 10-year manufacturer parts warranty
  • ✓Stronger indoor humidity control and steadier temperatures across every room
  • ✓Clean, quiet operation with modern scroll compressors and swept-wing condenser fans
  • ✓Option to bundle furnace replacement at the same time for a fully matched heating and cooling system

When Homeowners Should Schedule AC Replacement

Call for a replacement quote whenever a repair estimate on an AC over 12 years old exceeds 35% to 40% of the cost of a new system.

Request an evaluation if your system loses refrigerant every summer, uses phased-out R-22 refrigerant, or has a shorted compressor.

Off-season replacements in spring or autumn offer the most flexible scheduling, while our emergency install crews handle urgent replacements when a compressor fails in the middle of summer.

Our AC Replacement Process

Step 1

Call for an On-Site AC Replacement Quote

Call (855) 734-0279 with your zip code. We inspect your existing outdoor unit, indoor coil, furnace blower, line set, and electrical circuit.

Step 2

Cooling Load Check and System Selection

We verify the right tonnage (1.5 to 5 tons) for your home and provide clear written quotes for standard single-stage, two-stage, or variable-capacity SEER2 systems.

Step 3

EPA Refrigerant Recovery and Matched Coil Install

We recover old refrigerant safely, set a new outdoor pad and disconnect box, install the new outdoor condenser and indoor evaporator coil, and braze the copper lines with nitrogen.

Step 4

Deep Vacuum, Subcooling Charge, and Startup

We pressure-test with dry nitrogen, evacuate the lines below 500 microns, dial in factory subcooling/superheat, and verify cold supply air at your registers.

What Is Included in Your Service Visit

✓EPA-compliant recovery of old refrigerant and haul-away of old AC equipment
✓New outdoor SEER2 condensing unit on a leveled composite equipment pad
✓New matched indoor cased or uncased evaporator coil with TXV/metering device
✓Copper refrigerant line set flush or replacement and fresh suction-line insulation
✓Nitrogen-purged brazing and 500-micron deep vacuum evacuation
✓New exterior high-voltage electrical disconnect box and weatherproof whip
✓Primary condensate drain line reconnection and overflow safety float switch
✓Full startup commissioning: static pressure, superheat, subcooling, and temperature split

AC Replacement Options

Standard SEER2 Single-Stage Split AC Replacement

Dependable, code-compliant outdoor condenser and matched indoor evaporator coil.

Best for: Homeowners wanting reliable cooling and a strong warranty at the lowest upfront replacement price.

Two-Stage / Variable-Capacity High-SEER2 System

Runs at lower speed during mild heat to pull maximum humidity out of the air and lower electric bills.

Best for: Hot, humid climates, two-story homes, and homeowners keeping their house long-term.

Complete Matched AC + Furnace Combo Replacement

Replacing the outdoor condenser, indoor coil, and central furnace together as one engineered system.

Best for: Homes where both the furnace and air conditioner are 14+ years old.

Common Mechanical Faults & Field Fixes

Component / IssueTypical SymptomStandard Technical Fix
Grounded or Locked-Rotor CompressorOutdoor breaker trips instantly when cooling is called; compressor windings test shorted to ground.Full condenser and indoor coil replacement on systems out of warranty.
Formicary Corrosion in Indoor Evaporator CoilMicroscopic pinhole leaks in the indoor coil causing refrigerant loss every season.Upgrade to a modern all-aluminum evaporator coil and matched SEER2 condenser.
Undersized or Oversized Legacy TonnageOld unit either runs nonstop without cooling or blasts cold air for 5 minutes and leaves the house muggy.Right-size the replacement tonnage and match airflow at the furnace blower.

Pricing Considerations & Upfront Quotes

Central AC replacement pricing depends on cooling capacity (1.5 ton to 5 ton), SEER2 efficiency rating, staging (single-stage vs. two-stage), and indoor coil location (basement, closet, or tight attic).

Replacing the indoor evaporator coil at the same time as the outdoor unit is standard practice so your new compressor is protected and your 10-year manufacturer warranty remains valid.

You get a complete, itemized written price before you commit to anything.

Frequently Asked Questions About AC Replacement

How long does it take to replace a central air conditioner?

A standard central AC condenser and indoor evaporator coil replacement takes 5 to 8 hours and is completed in a single day.

Why do I need to replace the indoor coil if only the outside unit broke?

The outdoor condenser and indoor evaporator coil are a sealed refrigerant loop calibrated to work together. Pairing a new SEER2 outdoor unit with an old indoor coil causes wrong refrigerant pressures, contaminates the new compressor with old oil, and voids the manufacturer warranty.

How do I know what tonnage AC my house needs?

Tonnage is based on square footage, ceiling height, window exposure, duct capacity, and local climate zone, not just copying what was installed 15 years ago. Our technician verifies the correct sizing during your on-site visit.

24/7 Techs Available

Furnace & Central AC Service

Call (855) 734-0279